To fax using one-touch dialing, To fax using one-touch dialing -5 – Konica Minolta bizhub 160f User Manual
Page 119
Advertising
Faxing
5
bizhub 160f
5-5
To fax using one-touch dialing
If one-touch dial keys have already been programmed with fax numbers, the
fax number of a recipient can be specified by pressing just the corresponding
one-touch dial key.
1
Press the [Fax] key to enter fax mode.
2
Load the document into the automatic document feeder.
3
If necessary, change the resolution setting (p. 5-14).
4
Press the one-touch dial key ([01]
through [15]) programmed with the
fax number that you wish to send the
fax to.
5
Press the [Start] key.
The machine automatically starts
scanning the document and sending
the fax.
!
Detail
For details on programming the one-touch dial keys, refer to “Specifiying
ONE-TOUCH DIAL” on page 7-28.
Advertising