Konica Minolta bizhub 160f - Manual (Page 77)

Before making copies or faxing 3
bizhub 160f 3-27
Precautions for loading paper
Please adhere to the following precautions:
-
Be sure to observe the paper specifications (paper type, paper size, and
capacity) for each tray, otherwise a paper misfeed could result.
- When paper is loaded into the bypass tray, a message appears, indicat-
ing that the paper size be specified. Specify the size and type of paper
that is loaded. Paper loaded into the bypass tray is given priority during
feeding.
- The size of FLS is preset to 330 mm × 210 mm. To change the FLS size,
contact a service representative.
Unsuitable paper
The following types of paper should not be used, otherwise decreased print
quality, paper misfeeds or damage to the machine may occur.
-
Overhead projector transparencies that have already been fed through
the machine
Even if the transparency is still blank, do not reuse it.
- Paper that has been printed on by a heat-transfer printer or an inkjet
printer
- Paper that is either extremely thick or extremely thin
- Folded, curled, wrinkled, or torn paper
- Paper that has been left unwrapped for a long period of time
- Damp paper
- Perforated paper or paper with punched holes
- Extremely smooth or extremely rough paper, or paper with an uneven
surface
- Paper that has been treated, such as carbon-backed, heat-sensitive or
pressure-sensitive paper
- Paper that has been decorated with foil or embossing
- Paper of a non-standard shape (not rectangular)
- Paper that is bound with glue, staples or paper clips
- Paper with labels attached
- Paper with ribbons, hooks, buttons, etc. attached