Konica Minolta bizhub 160f - Manual (Page 215)

Using the utility mode 7
bizhub 160f 7-51
Specifying BATCH TX
If the batch transmission setting (transmission time) is specified for a one-
touch dial key programmed with recipient fax numbers, multiple documents
can be stored in the memory and sent out together at the specified time.
2
Note
A one-touch dial key must first be programmed with the fax number of
the recipient for the batch transmission.
To set batch transmitting
1
Select the BATCH TX in the FAX
REGISTRATION menu.
For details, refer to page 7-27.
2
Press the one-touch dial key pro-
grammed with the recipient that you
wish to send the batch transmission
fax to.
A screen appears, allowing you to specify the transmission time.
? Was the one-touch dial key that was pressed one programmed for
group dialing, program dialing, or not registered fax number, or not
programmed at all?
% An error message appears.
3
Using the 10-key pad, enter the de-
sired transmission time, and then
press the [Yes] key.