Specifying memory rx mode, Specifying memory rx mode -64 – Konica Minolta bizhub 160f User Manual
Page 228
7
Using the utility mode
7-64
bizhub 160f
Specifying MEMORY RX MODE
1
Select the
MEMORY RX MODE
in
the RX OPERATION menu.
For details, refer to page 7-63.
2
Using the [*] and [)] keys, select
ON
, and then press the [Yes] key.
3
Using the 10-key pad, enter the time
for memory reception to begin, and
then press the [Yes] key.
–
To specify that memory reception
stays on from the time that it is set to
ON
until it is manually can-
celed, press the [Yes] without entering a start time. (Skip to step 6.)
4
Using the 10-key pad, enter the time
for memory reception to end, and
then press the [Yes] key.
5
Using the 10-key pad, enter the 4-
digit password used to cancel mem-
ory reception, and then press the
[Yes] key.
–
If no password is to be specified, press the [Yes] key without enter-
ing anything.
The RX OPERATION menu appears again.