Konica Minolta bizhub 160f - Manual (Page 192)

7 Using the utility mode
7-28 bizhub 160f
Specifiying ONE-TOUCH DIAL
If the one-touch dial keys are programmed with fax numbers, the recipient
can be specified easily and accurately without the need to manually enter the
number using the 10-key pad.
A maximum of 15 numbers can be programmed.
To program a one-touch dial key
1
Select the ONE-TOUCH DIAL in the
FAX REGISTRATION menu.
For details, refer to page 7-27.
2
Press the one-touch dial key that you
wish to program.
3
Enter the name of the programmed
number.
– For details on entering text, refer
to “Entering Text” on page 3-23.
– Text up to 20 characters long can be entered for the name.
4
Press the [Yes] key.
5
Using the 10-key pad, enter the fax
number of the recipient.
– The fax number can contain a
maximum of 30 digits.
For details on the characters that can be entered. Refer to “To fax
by entering the fax number directly using the 10-key pad” on
page 5-3.
– To enter a SUB, continue with step 7.
– If a SUB will not be entered, press the [Yes] key after entering the
fax number, and then skip to step 10.
– If you wish to change the fax number, press the [No/C] key, and
then enter the correct number.
– For details on F codes (SUB and SID), refer to “Using F codes” on
page 6-27.