To fax using group dialing, To fax using group dialing -7 – Konica Minolta bizhub 160f User Manual
Page 121
Advertising
Faxing
5
bizhub 160f
5-7
To fax using group dialing
If one-touch dial keys have already been programmed with a group of fax
numbers, the fax numbers of all recipients in the group can be specified by
pressing just the corresponding one-touch dial key.
1
Press the [Fax] key to enter fax mode.
2
Load the document into the automatic document feeder.
3
If necessary, change the resolution setting (p. 5-14).
4
Press the one-touch dial key ([01]
through [15]) programmed with the
group of fax numbers that you wish
to send the fax to.
5
Press the [Start] key.
The machine automatically starts
scanning the document and sending
the fax.
!
Detail
For details on programming one-touch dial keys with a group of fax num-
bers, refer to “Specifying GROUP DIAL” on page 7-36.
Advertising