Selecting the reporting menu, Specifying activity report – Konica Minolta bizhub 160f User Manual
Page 239
Using the utility mode
7
bizhub 160f
7-75
Selecting the REPORTING menu
1
Press the [Utility] key ten times.
REPORTING
appears.
2
From the 10-key pad, press the key
([1] through [4]) for the reporting
function that you wish to set.
The reporting functions are as fol-
lows:
1 ACTIVITY REPORT
2 RESERV.REPORT
3 TX RESULT REPORT
4 RX RESULT REPORT
2
Note
If, at any time, you wish to quit setting/changing a reporting function,
press the [No/C] key. When the message
STOP SETTING?
appears,
press the [Yes] key to quit.
To exit the REPORTING menu, press the [Panel reset] key. The main
screen appears again.
Specifying ACTIVITY REPORT
1
Select the
ACTIVITY REPORT
in the
REPORTING menu.
For details, refer to page 7-75.
2
Using the [*] and [)] keys, select ei-
ther
ON
or
OFF
, and then press the
[Yes] key.
The REPORTING menu appears
again.