Positioning a sheet original, Positioning a sheet original -36 – Konica Minolta bizhub 160f User Manual
Page 86
Advertising
3
Before making copies or faxing
3-36
bizhub 160f
Positioning a sheet original
Use the following procedure to position plain paper or an original that is not
suitable for use in the automatic document feeder.
1
Raise the automatic document feed-
er.
2
Place the original face down on the
original glass.
3
Position the original on the original
glass so that the corner of the origi-
nal aligns with the arrow in the up-
per-left corner of the original scales.
4
Gently lower the automatic docu-
ment feeder.
5
Specify the desired copy settings.
For details, refer to “Making a basic copy” on page 4-3 and “Basic Fax-
ing” on page 5-15.
6
Press the [Start] key.
This will start the print cycle.
Advertising