Konica Minolta bizhub 160f - Manual (Page 223)

Using the utility mode 7
bizhub 160f 7-59
Specifying RESOLUTION
1
Select the RESOLUTION in the TX
OPERATION menu.
For details, refer to page 7-58.
2
Using the [*] and [)] keys, select the
desired resolution setting, and then
press the [Yes] key.
The resolution settings appear as fol-
lows.
STD: Standard
FINE: Fine
S/F: Super
Fine
H/T: Half Tone
If H/T was selected, a screen appears, allowing you to make a detailed
setting. (Continue with step 4.)
If any setting other than
H/T was selected, the TX OPERATION menu
appears again.
3
Using the [*] and [)] keys, select the
desired halftone setting, and then
press the [Yes] key.
The halftone settings appear as fol-
lows.
STD: Standard
FINE:
Fine
S/F: Super Fine
The TX OPERATION menu appears again.