Selecting the admin. management menu, Selecting the admin. management menu -19 – Konica Minolta bizhub 160f User Manual
Page 183
Advertising
Using the utility mode
7
bizhub 160f
7-19
Selecting the ADMIN. MANAGEMENT menu
1
Press the [Utility] key four times.
ADMIN. MANAGEMENT
appears.
2
Press the [Yes] key.
3
From the 10-key pad, press the key
[1] for the
ADMIN. MANAGEMENT
function that you wish to set.
The admin. management functions are as follows:
1 REMOTE MONITOR
4
Using the 10-key pad, enter the 6-
digit administrator access number,
and then press the [Yes] key.
2
Note
If, at any time, you wish to quit setting an ADMIN. MANAGEMENT func-
tion, press the [No/C] key. When the message
STOP SETTING?
appears,
press the [Yes] key to quit.
Advertising