Specifying reduction rx, Specifying rx print, Specifying rx mode – Konica Minolta bizhub 160f User Manual
Page 230
7
Using the utility mode
7-66
bizhub 160f
Specifying REDUCTION RX
1
Select the
REDUCTION RX
in the RX
OPERATION menu.
For details, refer to page 7-63.
2
Using the [*] and [)] keys, select
ON
(print the document reduced),
OFF
(split the printout) or
CUT
(discard
any excess), and then press the [Yes]
key.
The RX OPERATION menu appears again.
Specifying RX PRINT
1
Select the
RX PRINT
in the RX OP-
ERATION menu.
For details, refer to page 7-63.
2
Using the [*] and [)] keys, select ei-
ther
MEMORY RX
or
PRINT RX
, and
then press the [Yes] key.
The RX OPERATION menu appears
again.
Specifying RX MODE
1
Select the
RX MODE
in the RX OP-
ERATION menu.
For details, refer to page 7-63.
2
Using the [*] and [)] keys, select ei-
ther
AUTO RX
or
MANUAL RX
, and
then press the [Yes] key.
The RX OPERATION menu appears
again.