Koller-Craft Plastic Hawkeye 1U rack mount 15" TFT monitor/keyboard drawer RPD-1151 - Manual (Page 40)

RPD-1151/1158 User Manual
37
♦
F6 Set
Pressing [F6] brings up an OSD configuration menu. To change a setting:
1. Move the highlight bar to the choice you want, then press [Enter].
2. On the submenu that appears next, move the highlight bar to the choice you
want and press [Enter].
An icon of a pointing finger indicates which choice is the currently selected one. An
explanation of the choices is given in the table, below:
Setting Function
CHANNEL
DISPLAY MODE
To select how the Port ID is displayed: the Number plus the
Name ( PN + NAME); the Number alone (PN); or the Name
alone ( NAME).
CHANNEL
DISPLAY
DURATION
To determine how long a Port ID displays on the monitor after a
port change has taken place : 3 Seconds; or Always On.
CHANNEL
DISPLAY
POSITION
To position where the Port ID appears on the screen. Use the
Arrow Keys, Pg Up, Pg Dn, Home, End, and 5 (on the numeric
keypad with Num Lock off), to position the Port ID display, then
press [Enter] to lock the position and return to the Set
submenu
SCAN DURATION To determine how long the display dwells on each port as it
cycles through the selected ports in Quick View Scan Mode.
The available options are: 3, 5, 10, 15, 20, 30, 40, and 60
seconds.
OSD ACTIVATING
HOTKEY
To select which Hotkey activates the OSD function: [Ctrl]
[Ctrl] or [Scroll Lock] [Scroll Lock]. The default is the Ctrl
key combination, but this may conflict with programs running
on the computers, in which case, the Scroll Lock option should
be used.
SET PASSWORD To set a password in order to control access to:
Locking/Unlocking the Console; Clearing the Name List; and
Restoring Default Values. See OSD Security Features, below,
for password setting details.
CLEAR THE NAME
LIST*
To clear all Port Names from the Name List. You are asked to
confirm before the procedure goes on. Key in Y, then press
[Enter] to confirm. While the names are being cleared, a
message appears on the display to indicate so. After the
names have been cleared, another message appears to
indicate that the procedure completed successfully
RESTORE To clear all settings from memory, and returns the unit to the