Kenwood KRF-V7771D - Manual (Page 13)

13
KRF-V7771D (En/T)
System connections
Connections
ANTENNA
AM
-FM 75 Ω
GND
Make connections as shown below.
Do not connect the power cord to a wall outlet until all connections are completed.
Antenna terminal connections
FM indoor antenna
The supplied indoor antenna is for temporary use only. For
stable signal reception we recommend using an outdoor
antenna. Disconnect the indoor antenna when you connect
one outdoors.
AM loop antenna
The supplied loop antenna is for indoor use. Place it as far as
possible from the receiver, TV set, speaker cords and power
cord, and adjust the direction for best reception.
AM loop antenna
FM indoor antenna
FM outdoor antenna
Connecting the antennas
Use the commercially
available antenna
adaptor.
1 Push lever. 2 Insert cord. 3 Return lever.
FM outdoor antenna
Lead the 75
Ω
coaxial cable connected to the FM outdoor
antenna into the room and connect it to the FM 75
Ω
terminal.