Kenwood KRF-V7771D - Manual (Page 45)

45
KRF-V7771D (En/T)
Operations
Display the component control screen.
Select the “Input Digital” icon so that “Auto” is displayed.
Play the software.
Adjust the volume. ¶
4
1
3
5
Surround play
Select the “Input Digital” icon so that “Auto” is displayed.
÷ When “Input Digital” is selected, the “Input Sound Status”
menu screen appears.
The display is alternated every time the “Input Digital” icon
is selected.
Auto += Manual
2
Select the icon of the component to be played.
(Example)
To play a DVD disc, make sure that the DVD player is assigned
to “Video4” and select the “Video4” icon.
÷ When “Auto” is displayed by selecting the “Input Digital” icon,
the playback is switched automatically when the output signal
from the source changes from a MPEG or Dolby Digital signal to a
PCM signal.
÷ If the digital input is not connected to the receiver, select “Input
Analog”.
Select the play key of the component to be played.
“Auto” should be displayed in normal use. If you want to set the
“Lstn Mode” to “Manual”, verify the surround play is still possible
by referring to the table on the previous page. By setting the “Lstn
Mode” to “Manual”, you can always use a fixed listen mode or
select the desired listen mode every time. (With “Manual”, the
listen mode can be selected whenever there is an input signal.)
÷ Select the icon of the component which has been assigned in
“Assigning the connected components to the selected
inputs”.
(
Ambience effects
1 Select “Main Menu” icon.
2 Select “Lsn” icon.
Open the “Lstn Mode” menu screen.
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
Snd Lsn Fnc S e t u p
Pro Logic
3 Stereo
Re-EQ
Digital
Lstn Mode Snd Fnc S t p
Stereo
A u t o On
MPEG
DSP !
1
2
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
Input Digi
Input Sound Status
PCM
Auto
Input Signal
÷ If you want to change each speaker’s volume temporarily : ⁄
÷ When playback is started, the sound may be cut or interrupted
before the input source is confirmed as Dolby Digital or MPEG.