Kenwood KRF-V7771D - Manual (Page 24)

24
KRF-V7771D (En/T)
Setup
1
Open the “Setup” menu and select “Macro” icon.
1 Select the “Main Menu” icon.
2 Select the “Stp” icon.
1 Select the input to be played with the or icon.
Each selection of the icon switches the inputs as follows.
= VIDEO1 += VIDEO2 += VIDEO3 += VIDEO4 +=CD1
+= MD/Tape1 +
2 Select the “Edit” icon.
÷ The Edit menu is not displayed if none of the connected compo-
nents has been assigned to Video1.
2
Select the input to contol.
Perform operation in the “Macro Edit: Custom 1” screen.
3
To set the timing of the component selected in step 2 above,
select the icon corresponding to the component.
General setup flow
Setting up the remote control unit for macro play (automatic operation)
1Open the “Setup” menu and select “Macro”
icon.
2Select the input to control.
3Selection in the “Macro Edit: Custom 1” screen
4 − 6 Setting the target component in the “Edit”
menu
The macro play function allows you to set the remote to
control several components in succession. After completing
this setup, you can perform a series of operations automati-
cally. Enter the setup codes for the components you want to
control beforehand.
Setup for macro play (automatic operation)
÷ Device : Open the menu screen to set up the connected
devices (components).
÷ TV : Open the menu screen for the TV setup.
3 Select the “Macro” icon.
Three kinds of macros, “Custom 1”, “Custom 2” and
“Custom 3” can be set and registered.
Example when the VCR is assigned to “Video1”.
Macro Edit:Custom 1
TV
Device
VCR
Lstn Mode Snd Fnc S t p
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
Snd Lsn Fnc S e t u p
IR
Download
Surround Input
Back Light
Macro
2
1
3
Custom1 Cstm2 Cstm3
Edit
Video1 VCR Input
selector
component
1
2