Kenwood KRF-V7771D - Manual (Page 17)

17
KRF-V7771D (En/T)
Setup
Setup of the remote control unit
Basic operation
ON/STANDBY
MUTE
VOLUME
ENTER
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
CONFIRM
Speaker Selection
Custom Setup
Next
SW Entr
No
C
Yes
S
Yes
Quick Setup
Note Note Note
The display’s backlight will be
turned off if the remote control
was left for several seconds
without any operation. In this
case, touch any key to turn the
display back on.
÷ When the display is off, the first
press of the ON/STANDBY key
does not turn on or off the system,
but turn on the display.
Basic use of the remote control
1
Move the cursor to the icon you want to select.
ENTER
joystick
÷ You can move the joystick up,
down, left, or right, but not di-
agonally.
Icons :
Custom Setup
Icons with shadow :
activate the functions or commands
when they are selected.
Icons with no shadow :
open related menu screens when
they are selected.
2
Enter the selected icon.
ENTER ENTER key
You will find the Entr icon in some menu screens.
Even in this case press the ENTER key after you have
selected the icon.
÷ This operation is omitted in other pages in order to simplify the
explanations.
Functions
Communication status display
Next
Entr
Transmitting
Receiving
Transmission/
reception inhibited
Confirm the current status
CONFIRM
When you want to know the current
settings, or when the display shuts
off, press the CONFIRM key to show
the current status on the diplay.
Return to the previous display
Selecting the “Return(check-mark)“
icon leads you to the previous menu
screen.
CONFIRM key
Return icon
÷ Select “Main Menu” icon if you want to go back to the first menu
screen.
S
Yes
Shadow