Kenwood KRF-V7771D - Manual (Page 26)

26
KRF-V7771D (En/T)
Setup
1
2
Select the “Macro” icon .
Execute a macro in the “Macro Execute” menu screen.
Macro Execute
By setting up the items in “Setting up the remote control
unit for macro play (automatic operation)”, you can start
automatic play using the macro function.
Setup for macro play (automatic operation)
Select the icon of the component to be controlled.
Video On :
Turns the video component's power ON . The receiver's
power will be turned on at the same time.
TV’s power will be turned ON and OFF alternately
everytime “Video On” icon is selected.
Video Off : Turns the video compontnet's power OFF. The
receiver’s power will be turned off at the same time.
TV’s power stays the same although “Video Off” icon
is selected.
Audio On : Select to turn on the audio components.(In the case of
system connection)
Audio Off : Select to turn off the audio components.(In the case of
system connection)
Custom 1 : Select to execute “Macro Custom 1”.
Custom 2 : Select to execute “Macro Custom 2”.
Custom 3 : Select to execute “Macro Custom 3”.
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
Macro
Macro Execute
Video On
Video Off
Audio On
Audio Off
Custom1
Custom2
Custom3
÷ May not operate normally depending on the video signals of the
connected components.