Kenwood KRF-V7771D - Manual (Page 27)

27
KRF-V7771D (En/T)
Operations
Playing music
1
2
Select the source.
On the main unit, the input sources are switched in the follow-
ing order :
Tuner (Frequency display)
CD1
MD/Tape1
VIDEO1
VIDEO2
VIDEO3
VIDEO4
AV AUX
PHONO
Adjust the volume.
4
÷ Turning the VOLUME control at a high speed increase the volume
change rate. (AI VOLUME function)
÷ The input source (which is indicated on the receiver) cannot be
played while “CD2/Tape2 (Monitor)” is on (which is indicated by
the lightning of the indicator on the receiver front panel).
3
Play the selected input source.
Operation of the
source component
Be sure to perform the setups in “Setup” chapter if you
want to control the system control operations.
To increase
volume
Use the following procedure to play a CD or MD.
Preparation
1 Perform the operations in “Connections” chapter.
2 Perform the operations in “Setup” chapter.
Press the ON/STANDBY (POWER) key to turn the unit ON.
Select the play icon
Select the icon of the desired source.
÷ *1 :Press the POWER key to ON before pressing the ON/
STANDBY key.
÷ Load the CD player or MD recorder with the disc to be played.
Main unit RC
Main unit RC
To decrease
volume To increase
volume
To decrease
volume
Main unit RC
Main unit RC
Switching between digital input and analog input
Select “Input Analog” or “Input Digital” according to the input
you are going to listen to.
For switchig, refer to the “Playback of digital input/playback
of analog input”.
ª
POWER
ON/STANDBY
ON OFF
ON/STANDBY
INPUT SELECTOR
VOLUME
DOWN UP
*1
or etc.
VOLUME
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu Input Analog
Input Digital