Kathrein UFS 790sw - Manual (Page 27)

27
FIRST INSTALLATION (DVB-T ANTENNA)
Using the

buttons, select whether the DVB-T antenna is to be supplied with power from the
receiver (select “On”) or whether the DVB-T antenna has a dedicated power supply (select “Off”).
Press the
!
(green) button to open the next menu:
Make here the settings for the parameters for the DVB-T channel search. The receiver automatically
defi nes in the software the lowest start frequency and highest end frequency. You should only change
these settings if you know exactly on which channels the DVB-T channels are broadcast in your area.
You can make the changes using the

buttons, the line to be changed can be selected using the

buttons. In addition, in the “Channels to search for” line you can use the

buttons to select
whether you want to search only for free-to-air channels, only for encrypted channels, or for all channels.
Press the
!
(green) button to open the next menu: