Kathrein UFS 790sw - Manual (Page 44)

44
COMMON INTERFACE
Always follow the operating instructions from your Pay-TV provider and the
instructions supplied with the Smartcard and the CA module!
Smartcards and CA modules are not included with this product!
The cards and modules are issued by the respective Pay TV providers, and contain
the subscriber data and details of the channels for which the subscriber has paid.
These channels are always encrypted.
Contact the Pay TV provider if you are interested in subscribing to a particular
Pay TV channel.
You are responsible for the use of the Smartcard in the CA!
The Smartcard sold by the Pay TV provider, specifi c to a particular encryption
technology, is inserted into the CA module.
Store your card and PIN code securely when not in use!
IMPORTANT INFORMATION
The Common Interface (CI) on the UFS 790si/sw can accept one CA (Conditional Access) module.
The CI slot is under the display at the right of the front panel.
The CA module

draws in the Smartcard

(chip contacts pointing downwards and towards socket
strip) which it then inserts into the CI slot .
The Smartcard should be inserted into the CA module without exerting excessive force. This also applies
to inserting the CA module into the CI slot!
Do not use without excessive force, and follow the instructions supplied with the Smartcard and the
CA module.
To remove the module, press the relevant eject button .
INSERTING THE SMARTCARD AND THE CA MODULE

INSERTING THE CA MODULE INTO THE CI
The Smartcard is inserted into the Smartcard reader (Cryptoworks embedded)

in exactly the same
way as into the CA module, except that in this case the chip contacts point downwards.
INSERTING THE SMARTCARD INTO THE SMARTCARD READER