Kathrein UFS 790sw - Manual (Page 39)

39
RECORDING (TIMER)
Remember to
program your
external recorder
in accordance
with the timer list
in the receiver.
EPG (ELECTRONIC PROGRAM GUIDE)
Use the

buttons to select the desired recording mode (repeat). The following recording
mode options are available:
-
Once Only: The recording will be performed once only
- Daily: The recording will be performed daily at a time specifi ed by you
- Weekly: The recording will be performed once a week on the same day and at the same time
- Monday to Friday: The recording will be performed Mon-Fri at the specifi ed time
Use the cursor buttons (
 
) to select the further items and use the number pad to complete
the settings. When all settings have been made, press the button to save the recording settings.
You can view the scheduled recordings in the timer list view of the EPG (see “Timer List” section).
The

(red dot) button allows you to set up a program at any time for recording on an external recorder.
The program to be recorded can be selected in any of the EPG views, provided the

(red dot) button
appears at the bottom of the screen display.
Program present in the EPG:
Select the desired program and press the

(red dot) button. The following display appears (example):
Program not present in the EPG:
Select any program on the channel on which the desired program is to be transmitted at a later time and
press the

(red dot) button (starting and fi nishing times together with the recording date must be input
manually). The following display appears (example):