Kathrein UFS 790sw - Manual (Page 63)

63
This menu informs you which CA module is fi tted to your receiver and which Smartcard is present in
the CI slot. Select the “CryptoWorks - CI” menu using the

buttons and press the button to
open it. You will then see the menu generated by the CA module.
The screenshots below depend on the specifi c module and card, and so are only intended as
examples:
CRYPTOWORKS - CI (CA MODULE)
From this menu, your card and your PIN code allow you to access various channels from your Pay-TV
provider.
“CryptoWorks” has been selected as an example here. The details can be different for each CA module.
Always follow the instructions supplied by your Pay-TV provider!
Information for Conax, SECA, Viaccess and CryptoWorks users:
Note that with monthly activation intervals, the channel providers have different procedures
for activating Pay TV cards. Activation may therefore be a few days before or after the
beginning of a new month. During this activation period, the CA module and card must be
in the slot, and the receiver must be turned on and set to the booked Pay-TV channel.
Follow the instructions from the Pay-TV provider.
If your Pay-TV card is then still not enabled, we recommend you briefl y withdraw the CA
module with the card out of the slot, with the receiver switched on, and then re-insert it.
This information has nothing to do with the properties of the unit; it is merely intended
to assist you.
The various items can be selected using the

buttons and opened using the button.
Press the

button to exit the menu.
Note: The module displays may
be shown in English,
even if you have selected
German as the menu
language, because
the menu is generated
directly by the module!
BOX SETTINGS