Kathrein UFS 790sw - Manual (Page 73)

73
TECHNICAL APPENDIX
TECHNICAL FEATURES
¹ ) CA module not included with this product
² ) Only displayed if this information is broadcast by the channel provider
Reception of digital satellite and digital
terrestrial TV and radio channels
4,000 channel memory positions
16-character alphanumeric display with status
icons for indication of channel names and
transmitter information
Conax decoding system embedded
Common Interface for one CA module ¹ )
HDMI output for optimal transmission to a
fl at-screen TV set
Up-scaler for upscaling the Pal signal (576i)
to 576p, 720p and 1080i
Electronic programme guide (EPG) with
detailed information ²
)
Guided fi rst installation
Pre-programmed channel list
Automatic software download
Suitable for software download via satellite
and PC
4 favourite channel lists
Automatic date and time generation via
DVB data stream
On-screen display (OSD) in 8 languages
(D, GB, F, I, E, CZ, TR, NL)
8 timers; can also be programmed from
the EPG
Language selection for multilingual
broadcasts
Optical and electrical audio output for Dolby
Digital data stream (AC 3)
Composite colour, Y/C and RGB signal output
programmable via the Scart socket
Cinch sockets for audio L/R signal
Videotext decoder with 800 page memory
capacity and videotext generation
Channel search
Programme position sort function
DiSEqC TM 1.0 and SCR single cable control
signal
Remote feeding of an active DVB-T antenna
(e.g. BZD 30, BZD 40) via the terrestrial RF
input possible
Infra-red remote control
Power switch
An additional IR sensor can be connected