Kathrein UFS 790sw - Manual (Page 68)

68
SERVICE MENU
UPDATE SOFTWARE NOW
The following displays appear:
If as well as the new software a new servicelist for the receiver is also offered, you have the following
selection options (use the

buttons to make the selection):
- “Start update software”
- “Start update servicelist”
- “Start update servicelist and software”
Confi rm the desired selection with the button.
The following display appears (example):
When updating the servicelist, before installation you will see a display in which you can select how the
servicelist should be updated (use the

buttons to make the selection).
You can choose between:
- “Overwrite” - your existing servicelist will be completely
replaced by a new list of available channels. Your personal
channel sorting will be lost.
- “Update” - your existing list will only be updated, any new
channels found will be added at the end of the channel list.
The sort sequence of your channel list remains unchanged;
the only change is that the channel data (transmission
frequency etc.) are updated
- “Save, do not activate” - the new servicelist will be saved
by the receiver and can be selected at the next factory
reset. This has no effect on the current servicelist
- “Abort” - the new servicelist will not be loaded
Confi rm the desired selection with the button. The following display appears: