Kathrein UFS 790sw - Manual (Page 53)

53
AUTOMATIC SEARCH (DVB-T) TERRESTRIAL
The receiver automatically defi nes in the software the lowest start frequency and highest end
frequency. You should only change these settings if you know exactly on which channels the DVB-T
channels are broadcast in your area. You can make the changes using the

buttons, the line to
be changed can be selected using the

buttons. In addition, in the “Channels to search for” line
you can use the

buttons to select whether you want to search only for free-to-air channels,
only for encrypted channels, or for all channels. Once you have made all the settings, switch to the
last line and start the search using the button. The following display appears:
When using an active
antenna, ensure the power
supply for the antenna
is switched to “On”. You
can check this setting on
the menu “Box Settings”,
“Antenna settings”.
SEARCH FOR CHANNELS