Kathrein UFS 790sw - Manual (Page 52)

52
MANUAL SEARCH (DVB-S) SAT
Use the

buttons to select which satellites you want to cover with a search.
Use the

buttons to switch to “Transponder” and select the transponder to be covered by the
search using the

buttons. You can also manually enter the transponder frequency, the symbol rate
and the polarisation in the next three lines using the number pad buttons or using the

buttons.
Use the

buttons to switch to “Network search” and use the

buttons to select whether
the additional transponders, not yet saved, found due to the networking of the transponders are also
be searched for new channels.
Using the

buttons switch to “Channels to search for” and select whether you want to search
only for free-to-air channels, only for encrypted channels or for all channels using the

buttons.
Once you have made all the settings, switch to the last line and start the search using the button.
The displays once the search is complete are identical to those for the automatic search.
SEARCH FOR CHANNELS
Using the setting “Network search
On”, additional transponders, not
yet saved can be found by the
networking of the transponders.
They are then stored and
scanned for new channels in
the same way as the existing
transponders.
Polarisation