Lennox Hearth ADAGIO-MP - Manual (Page 11)

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
11
23-1/2” (597)
14-3/4”
(375)
20-3/4”
(527)
Facade (Required) *
(gated style shown)
1/2”
(13)
37-7/8”
(962) 18-3/4
(476)
1/2” (13mm) -
1-1/2” (38mm)
** A filigree inset kit is also required
(sold separately). See Care and
Operation Manual for ordering
information.
Notes
Due to Lennox' ongoing commitment to quality, all specifications, ratings and dimensions are subject to change without notice.
* With the facade installed (required - sold separately), the appliance base will need to be elevated a minimum of 3/4" above the floor to allow
for the proper fit of the facade (i.e. use 3/4" board minimum as platform).
Figure 11B
FACADE SPECIFICATIONS
Facade (Required) *
(arched style shown)
26-3/4” (680)
38-1/2”
(978)
20-1/4”
(514)
14-13/16” (376)
1/2”
(13)
1/2” (13mm) -
1-1/2” (38mm)
Arch Facades**
Black and Brushed Nickel Finishes
Cat.
No.
Model Description
H577 ADAGIO-AG Arch Black
H5774 ADAGIO-PF Arch Br. Nickel
Cat. No. Model Description
H5775 ADAGIO-IG Iron Gates
H5776 ADAGIO-CPD Copper Gates
Gated Facades
Copper and Iron Gates