Lennox Hearth ADAGIO-MP User Manual

Page 32

Advertising
background image

2

Step 5. Attach manometer to the manifold side

pressure test fitting and verify manifold pressure

reads 3.5 inches water column (0.87 kPa) for

natural gas, and 10.0 inches water column (2.49

kPa) for propane gas.

Step 6. Refer to Figure 55 and remove the

pilot hood assembly to access the hexed pilot

orifice. Remove and replace the orifice with the

one provided with the kit.

SIT Millivolt Gas
Valve Shown

Pressure

Regulator

Remove

These

Components

Figure 54

Millivolt & Electronic Gas Valves

HI

LO

SIT Electronic Gas Valve

Pressure

Regulator

SIT Millivolt Pilot Assembly Shown

Figure 55

Pilot
Orifice

Thermopile
(on millivolt
pilot assem-
blies only)

Millivolt & Electronic Pilot Assemblies

SIT Electronic Pilot

Pilot
Orifice

Step 7. (Refer to Figure 53 on Page 31)

A. Remove the orifice from the manifold and

replace it with the one provided in the kit.

See

Table 8 for orifice sizes for natural and

propane models.

Figure 56 illustrates the

orifice. Use pipe joint compound or teflon

tape when installing the orifice.

B. Retrieve the burner and slide the venturi

tube over the orifice (see

Figure 53). Set

the burner assembly into its position and

secure it.

Figure 56 - Burner Orifice

Step 8. Reassemble the remaining components
by reversing the procedures outlined in the
preceding steps. Use pipe joint compound or
Teflon tape on all pipe fittings before installing
(ensure propane resistant compounds are used
in propane applications, do not use pipe joint
compounds on flare fittings).

Step 9. Attach the conversion label provided
in the conversion kit to the rating plate on the
appliance.

Step 10. Turn on gas supply and test for gas
leaks.

Burner Orifice Sizes

Elevation 0-4500 feet ( 0-172 meters)

Model

Series

Nat.Gas

drill size (inches)

Propane

drill size (inches)

ADAGIO-MN

.067"
(#51)

-------------

ADAGIO-MP

-------------

.042"
(#58)

ADAGIO-EN

.067"

(#51)

-------------

ADAGIO-EP

if field converted

-------------

.042"
(#58)

Table 8

Printed in U.S.A. © 2007 Lennox Hearth Products

P/N 850,044M REV. D 06/2008

Lennox Hearth Products reserves the right to make changes at any time, without notice, in

design, materials, specifications, prices and also to discontinue colors, styles and products.

Consult your local distributor for fireplace code information.

1110 West Taft Avenue • Orange, CA 92865

Advertising
This manual is related to the following products: