Liebert GXT 2U - Manual (Page 23)

Communications
19
7.0 C
OMMUNICATIONS
7.1 C
OMMUNICATIONS
I
NTERFACE
P
ORT
The UPStation GXT 2U UPS has a standard DB-9 serial port female
connector located on the rear of the UPS unit. Several signals are pro-
vided on this port and are assigned as follows:
* Maximum voltage and current on pins 1, 7, 8, and 9 is 60VDC; 10.0 mA.
Pin Assignment Description
1 Low Battery (open collector)
2 UPS TxD (typical RS-232 levels)
3 UPS RxD (typical RS-232 levels)
4 Remote Shutdown (5-12VDC, 10-24 mA max); battery operation
5 Common
6 Remote Shutdown (short to pin 5); all modes of operation
7 Low Battery (open emitter)
8 Utility Fail (open emitter)
9 Utility Fail (open collector)
Pin Assignment Collector to Emitter*
5 4 3 2 1
6 7 8 9
(-)
(+)
330 Ohms
Open
Collector
Open
Emitter