Lexmark 5400 Series - Manual (Page 23)

Performing copying and related tasks
Making a copy
1 Load paper.
2 Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
3 From the control panel, press Copy Mode.
4 Press Start Color or Start Black.
Related topics:
• “Using the control panel” on page 90
• “Loading original documents on the scanner glass” on page 20
• “Loading original documents into the Automatic Document Feeder” on page 21
Copying photos
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.)
2 Place a photo facedown on the scanner glass in the upper left corner. For more information, see “Loading original
documents on the scanner glass” on page 20.
3 If necessary, press Copy Mode.
4 Press .
5 Press or repeatedly until Quality appears.
6 Press .
7 Press or repeatedly until Photo appears.
8 Press .
9 Press or repeatedly until Paper Size appears.
10 Press .
11 Press or repeatedly until the size you want appears.
12 Press .
13 Press or repeatedly until Original Size appears.
14 Press .
15 Press or repeatedly until the size you want appears.
16 Press Start Color or Start Black.
Copying
23