Panasonic MC-CG985 - Manual (Page 13)

- 13 - - 52 -
Overload Tools-
POWER Protector Headlight On-Board Cord Length Dirt Sensor
120V. AC (60Hz) Yes Yes Yes 28 Ft. (8.5 m) Yes
12.0 A
Protector
contra Extensión Detector
Voltaje subrecargas Luz Herramientas de cordón de tierra
120V. AC (60Hz) Si Si Si 8,5 m (28 pi) Si
12,0 A
Protecteur Dispositif Longueur Détecteur
Alimentation de surcharge d’éclairage Accessoires du cordon de poussière
120 V c.a. (60 Hz) Oui Oui Oui 8,5 m (28 pi) Oui
12,0 A
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
TO CHECK BRUSHES:
➢ ➢ When brushes are worn to the level
of the base support bar, replace the
brush dowel.
TO REPLACE AGITATOR
ASSEMBLY
➢ ➢ Remove POWER NOZZLE cover,
agitator cover, belt and agitator
assembly. (See “REMOVING
BELT”).
➢ ➢ Replace agitator assembly.
➢ ➢ Replace belt, agitator cover,
POWER NOZZLE cover and
screws. (See “REPLACING BELT”).
Base Support Bars
Barres de support de la base
Barra de soporte de la base
Brush Servicing
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before per-
forming maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.