Printronix L5520 - Manual (Page 105)

Downloading Into Flash Memory
105
29. Make the diskette drive the active drive by typing the following
at the DOS prompt:
A: <Return>
(If the diskette is in drive B, type B: <Return>)
30. Get the name of the emulation file on the diskette by listing the
contents of the diskette; at the DOS prompt type:
DIR <Return>
The file name of the emulation file on the diskette takes the
form
part_num.exe , for example 123456.exe.
Write down the complete name of the file with the .exe
extension. This is the file you will download into the printer.
31. On the printer control panel, press and hold down the
ONLINE+CLEAR keys. Without releasing the keys, power the
printer on. Continue holding the ONLINE and CLEAR keys
down.
32. When you see “WAITING FOR FILE DOWNLOAD” on the
LCD, release the ONLINE and CLEAR keys.
33. At the DOS prompt, type (for example):
123456.exe -pb <Return>
where 123456.exe is the emulation file you noted in step 26
(for an emulation on multiple diskettes) or in step 30 (for an
emulation on a single diskette). This command expands the
emulation file, then copies it as a binary file into the flash
memory in the printer.