Printronix L5520 - Manual (Page 230)

Appendix C Host I/O Interfaces
230
Dataproducts Parallel Interface Configuration
The printer is configured for the Dataproducts interface via the
Dataproducts Interface menu, as described on page 64. The
following interface configuration parameters may be modified to
meet specific application requirements:
NOTE: Only the factory default settings are shown above. See
page 64 for additional options.
Data Bit 8 Enable
P I Ignored Enable
Data Polarity Standard
Resp. Polarity Standard
Latch Data On Middle
Prime Signal Disable
TOF Action Reset
Buffer Size In K 64