Printronix L5520 - Manual (Page 48)

Chapter 3 Changing Printer Configurations
48
Changing Printer Configurations
IMPORTANT In order to properly configure the printer, it is important that
you have a current configuration printout, as described
previously. From this printout, determine which parameters
you need to change for the printer to operate correctly with the
host computer, or your specific applications.
To change printer settings such as paper length, emulation, and
host I/O interface, perform the following steps:
Step Press LCD Message
1. Place the printer offline. OFFLINE
CONFIG. CONTROL
2. Unlock the ENTER key. ENTER SWITCH
UNLOCKED
3. Scroll through the menu to
access available parameters or
submenus. OFFLINE
HOST INTERFACE
4. Select the menu to access
available parameters or
submenus. HOST INTERFACE
Centronics
5. Scroll through the parameters
until you reach the one you
want. HOST INTERFACE
Serial
6. Select this submenu parameter
to access the value options. Serial
Interface Type
7. Scroll through the value
options until you reach the
desired value. Serial
Baud Rate
ON LINE
+
OR
OR
OR