Adding new developer, Replace the cover and tighten the screws, Important – Printronix L5520 User Manual
Page 136
Advertising
Chapter 4
Consumables Replacement
136
Adding New Developer
11. Shake the developer bottle several times, remove the bottle
cap, and screw the nozzle tightly onto the bottle.
12. While rotating the new developing roller knob
counterclockwise, evenly pour the entire bottle of developer
powder into the developing unit.
13. Replace the cover and tighten the screws.
IMPORTANT
If toner or developer spills on clothing, use cold water to
remove it.
Bottle Of
New Developer
Developing
Roller Knob
Advertising