Printronix L5520 - Manual (Page 206)

Appendix B Paper Specifications
206
Table 7
Specification Inch Millimeter
Dimension
in Figure
Pin hole center to folding
perforation 1/6, 1/4,
1/3, or 1/2 4.23, 6.35,
8.47, 1.20 8
Hole center line to edge
of form 0.236
± 0.028 6.0 ±0.1 1
Hole diameter 0.156
± 0.004 4.0 ±0.1 N/A
Distance between
centers of two
consecutive holes 0.500
± 0.002 12.7 ±0.05 5
Max. deviation of holes
from their center line 0.004 0.1 6
Maximum vertical
deviation, from the left
hand hole center line to
the right hand hole
center line. 0.006 0.15 4
Maximum horizontal
deviation, from the left
hand hole center line to
the right hand hole
center line. 0.006 0.15 N/A