Printronix L5520 - Manual (Page 64)

Chapter 3 Host Interface Menus
64
Dataproducts Parameters
Data Bit 8
• Enable. Allows access to the extended ASCII character set.
• Disable. The printer interprets bit 8 of each incoming data
character as a zero, regardless of its actual setting.
PI Ignored
The PI (Paper Instruction) signal is used to control vertical paper
motion.
• Enable. Ignores the PI signal and treats the data as characters
or control codes.
• Disable. Causes the printer to interpret the eight data lines as
VFU commands when the PI signal is true.
Enable*
Disable Standard*
Inverted
Disable*
Enable Middle*
Trailing
Leading Standard*
Inverted
Enable*
Disable
Reset*
Do Nothing 1*
.
.
128
* Factory Default.
1
If installed.
Ethernet 1 Serial Centronics
HOST
INTERFACE
IEEE
1284 Auto
Switching
Dataproducts
PI
Ignored
Data
Polarity
Data
Bit8
Resp.
Polarity
Latch On
Data
Prime
Signal
TOF
Actions
Buffer Size
In K