Printronix L5520 User Manual
Page 19
19
•
The printer relies on protective devices in the building
installation for protection. The printer must be connected to a
30 Amp, 250 V outlet.
•
Do not operate the printer in a room that is not properly
ventilated. The room should be at least 1,000 cubic feet with a
complete air exchange every two hours.
•
Keep combustible materials away from the printer. Dispose of
used toner properly, because it is flammable.
•
Some components in the printer are potentially hazardous. For
example, the fuser unit becomes very hot under normal
operating conditions and several components use high voltage.
•
Handle the photoreceptor drum properly. Do not put used
drums in the trash; instead, ship them to the appropriate
disposal facility for recycling. (See
•
Do not block or obstruct any cabinet ventilation slots.
•
Never spill liquid of any kind on or in the printer. Use only
manufacturer-approved cleaning agents and methods.
•
Make sure nothing rests on the power cord. Do not place the
power cord where people can walk on it or under any carpet.
•
Do not lean on or place heavy objects on top of the printer.
•
Turn off the power immediately if the printer emits an unusual
noise or smell.
•
Do not look directly at the flash lamp light.