Printronix L5520 - Manual (Page 183)

Reprinting Pages After A Fault Condition
183
If Reprint On Fault Is Disabled:
• Any pages left in the printer at the time of failure are not
reprinted. Data is lost (you need to reprint the lost pages
according to your application software).
If Reprint On Fault Is Confirm:
• The control panel on the printer returns a message asking
whether or not to reprint. Answer Yes to reprint, answer No if a
reprint is not necessary.
Whether Reprint On Fault Is Enabled, Disabled, Or Confirm:
• After a paper jam, you may need to reload the paper onto the
tractors.
Table 6, “Error Messages” on page 188, designates those errors
that require reprinting to recover from an error condition.
NOTE: Some errors require reprinting, regardless of your printer
configuration. Refer to Table 6 for details.
Clearing A Fault When Reprint On Fault Is Disabled
1. A fault occurs.
2. Do what is necessary to correct the fault condition.
3. Press CLEAR.
4. The STAND BY LED blinks and the following message appears
while the printer attempts to clear the fault:
• If the fault is not cleared:
a. The printer beeps and briefly displays the following
message:
Standby ...
Clearing Fault
Faults Not Cleared