Panasonic AJ-HD1800P - Manual (Page 100)

100
Setup menus
(continued)
<VIDEO> (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*2 When the 50 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD,
SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*3 When the 23/24 Hz mode, 25 Hz (HD) mode, or 50 Hz (HD)
mode is selected in System Menu No. 25 (SYSTEM FREQ),
this item is not displayed.
*UP: With HD output (HD tape playback or up-converted output)
*DW: With SD output (SD tape playback or down-converted output)
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
672
CONTRAST
For adjusting the contrast of the LCD monitor
on the front panel.
0000
-7
: :
0007 0
: :
0014 7
673
BACKLIGHT
For adjusting the backlight
0000 NORMAL
Normal mode
0001 HIGH
The backlight is brighter than NORMAL.
676* 2
BLK CLIP
This function clips the signals below the
pedestal level for SD SDI OUT and composite
OUT Y (luminance) signals.
0000
OFF
The signals are not clipped.
0001 ON
The signals are clipped.
680 *1
CC (F1)
BLANK *DW
For selecting ON or OFF for the closed caption
signals in the first field.
0000
BLANK
The signals are forcibly blanked.
0001 THRU
The signals are not blanked
681*
1
CC (F2)
BLANK *DW
For selecting ON or OFF for the closed caption
signals in the second field.
0000
BLANK
The signals are forcibly blanked.
0001 THRU
The signals are not blanked.
682
VO SETUP
(HD) *UP
(This menu is
not displayed
for AJ-
HD1800E.)
This selects the composite output signal in HD
mode.
0000
THRU
The signal is output with no setup added.
0001 ADD22L
The signal is output from line 22 with a 7.5%
setup added.
0002 ADD21L
The signal is output from line 21 with a 7.5%
setup added.
0001 ADD20L
The signal is output from line 20 with a 7.5%
setup added.
683
VO SETUP
(SD) *DW
(This menu is
not displayed
for AJ-
HD1800E.)
This selects the composite output signal in SD
mode.
0000
THRU
The signal is output with no setup added.
0001 ADD22L
The signal is output from line 22 with a 7.5%
setup added.
0002 ADD21L
The signal is output from line 21 with a 7.5%
setup added.
0001 ADD20L
The signal is output from line 20 with a 7.5%
setup added.
684
EDH (SD) *DW
For selecting whether EDH is superimposed on
SD SDI output
0000 OFF
EDH is not superimposed.
0001 ON
EDH is superimposed
No./Item Description of setting
685* 1
ESR MODE
(SD)
*DW
For selecting the operation mode for edge
subcarrier reduction (ESR) in the playback
circuit.
0000 OFF
ESR is forcibly set to OFF
0001 AUTO
ESR is automatically set to ON or OFF in
accordance with the VTR operation
686* 1
CCR MODE
(SD)
*DW
For selecting the cross color processing during
playback.
0000 OFF
The cross color is output as is.
0001 ON
The cross color can be reduced
687*
3
SDI INDEX 0
*DW
For selecting whether to superimpose the
VIDEO INDEX signal on the SD SDI output
signal.
0000 OFF
The VIDEO INDEX signal is not superimposed
on the SD SDI output signal.
0001 ON
The VIDEO INDEX signal is superimposed on
the SD SDI output signal.
688* 1
CC REC
For selecting whether to record the closed
caption signals which are superimposed on the
SD input signal.
0000 OFF
The closed caption signals are not recorded on
the tape.
0001 ON
The closed caption signals are recorded on the
tape if they are superimposed on the SD input
signal. In this case, they are blanked, up-
converted and then recorded.