Panasonic AJ-HD1800P - Manual (Page 103)

103
Setup menus
(continued)
<AUDIO> (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*2 When 1394 is selected in System Menu No. 600 (VIDEO IN
SEL), it is the 1394 input regardless of the selection in this
menu.
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
709
CUE OUT LV
For selecting the CUE output reference level.
0000 4dB
0001 0dB
0002 -3dB
0003 -20dB
710
MONIL OUT LV
For selecting the audio monitor output (Lch)
reference level.
0000 4dB
0001 0dB
0002 -3dB
0003 -20dB
711
MONIR OUT
LV
For selecting the audio monitor output (Rch)
reference level.
0000 4dB
0001 0dB
0002 -3dB
0003 -20dB
712
MONI OUT
For selecting whether the volume of audio
monitor output is interlocked to the volume
adjustment knob or not.
0000 UNITY
The signals are output at a fixed level.
0001 VAR
The signal output is coupled with the head-
phones volume control.
713* 1,2
CH1 IN SEL
For selecting the CH1 input signal.
0000 INT SG
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected.
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.721 (D IN
SEL 12).
714*
1,2
CH2 IN SEL
For selecting the CH2 input signal.
0000 INT SG
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected.
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.721 (D IN
SEL 12).
715* 2
CH3 IN SEL
For selecting the CH3 input signal.
0000 INT SG
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected.
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.722 (D IN
SEL 34).
No./Item Description of setting
716*
1,2
CH4 IN SEL
For selecting the CH4 input signal.
0000 INT SG
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected.
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.722 (D IN
SEL 34).
717* 1,2
CH5 IN SEL
For selecting the CH5 input signal.
0000 INT SG
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected. (CH1 input)
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.723 (D IN
SEL 56).
718* 1,2
CH6 IN SEL
For selecting the CH6 input signal.
0000 INT SG
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected. (CH2 input)
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.723 (D IN
SEL 56).
719* 1,2
CH7 IN SEL
For selecting the CH7 input signal.
0000 INT SG
The internal signal is selected.
0001 DIGI
Digital input signals are selected.
0002 ANA
Analog input signals are selected. (CH3 input)
<Note>
When DIGI has been selected, whether serial or
AES is selected for the input is determined by the
setting selected for setup menu item No.724 (D IN
SEL 78).