Panasonic AJ-HD1800P - Manual (Page 140)

140
Specifications
(continued)
[VIDEO] (continued)
Video signal adjustment ranges
z Component style
HD/SD SDI, composite output Y gain:
– to +3 dB
HD/SD SDI, composite output P B gain:
– to +3 dB
HD/SD SDI, composite output P
R
gain:
– to +3 dB
HD/SD SDI, composite output Y black level:
d10%
z Composite style
HD/SD SDI, composite output video gain:
– to +6 dB
HD/SD SDI, composite output chroma gain:
– to +3 dB
HD/SD SDI, composite output chroma phase * 1 :
d30x
HD/SD SDI, composite output setup:
d10%
z System phase
HD serial digital output system phase
1080i: d1.0H (13.5 nS step)
59.94/60 Hz : d2200 Sample
50 Hz : d2640 Sample
23.98/24 Hz : d2750 Sample
720p: d1.0H (13.5 nS steps)
59.94/60 Hz : d1650 Sample
50 Hz : d1980 Sample
SD serial digital/composite video output system phase
d1.0H 37 nS steps
59.94 Hz : d1716 Sample
50 Hz : d1728 Sample
Composite video output SC phase:
d180x or more
*1: Only the SD SDI composite output of SD tape playback is valid
in the 50 Hz or 25 Hz mode.
[AUDIO]
Digital Audio
Sampling frequency:
48 kHz (synchronized with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz d1.0 dB (at reference level)
Dynamic range:
Better than 90 dB (1 kHz, emphasis OFF)
Distortion:
Less than 0.05% (1 kHz, emphasis OFF, reference level)
Crosstalk:
Less than j80 dB (1 kHz, between 2 channels)
Wow & flutter:
Below measurable limit
Headroom:
20/18/12dB selectable
Cue Track
Frequency response:
300 Hz to 6 kHz d3 dB
Audio Input Connectors
Analog input (CH1 to CH4)
XLR k 4, 600 h/high impedance (selectable),
+4/0/ j3/j20 dBu selectable
Digital input (CH1/CH2, CH3/CH4, CH5/CH6, CH7/CH8)
BNC k 4, AES/EBU format
HD serial digital input
BNC 1
(Complies with the SMPTE 292M/296M/299M standards)
BNC
k 1 (active-through)
SD serial digital input
BNC 1
(Complies with the SMPTE 259M-C/272M-A, ITU-R BT.656-4
standards)
BNC
k 1 (active-through)
Cue track input
XLR k 1, 600 h/high impedance (selectable)
+4/0/ j3/j20/j60 dBu switchable
Audio output Connectors
Analog output (CH1 to CH4)
XLR k4, low impedance
+4/0/ j3/j20 dBu switchable
Digital output (CH1/CH2, CH3/CH4, CH5/CH6, CH7/CH8)
BNC k 4, AES/EBU format
HD serial digital output
BNC k 4
(complies with SMPTE 292M/296M/299M standards)
SD serial digital output
BNC k 2
(Complies with the SMPTE 259M-C/272M-A, ITU-R BT.656-4
standards)
Cue track output
XLR k 1, low impedance
+4/0/ j3/j20 dBu switchable
Monitor output
XLR k 2, low impedance
+4/0/ j3/j20 dBu switchable
Headphone output
M6 8 h, Level variable
Audio level adjustment range
– to +12 dB