Panasonic AJ-HD1800P - Manual (Page 139)

139
Specifications
[GENERAL]
Operating ambient temperature:
5 xC to 40 xC (41 xF to 104 xF)
Operating ambient humidity:
10% to 80% (no condensation)
Storage temperature:
–20°C to 60°C (–4°F to 140°F)
Dimensions (W k H k D):
424 mm (max. 435.4 mm) a 175.2 mm a 417 mm
16-3/4 inches (max. 17-3/16 inches) a 6-15/16 inches a
16-7/16 inches
(not including supporting feet, jacks and connectors, JOG dial
and fan)
Weight:
19.5 kg (43.0 lb)
Recording format:
DVCPRO HD-LP
Video signals recorded:
1080i (50 Hz/59.94 Hz switching)
720p (50 Hz, 59.94 Hz and 60 Hz <only for Varicam>
switching)
480i/59.94Hz
576i/50Hz
Audio signals recorded:
48 kHz, 16 bits, 8 channels
Recording tracks:
z Digital video/audio:
Helical track
z Time code:
Helical track (sub code area)
z Cue track:
1 track
z Control (CTL) track:
1 track
Tape speed:
67.64 mm/sec. (in 59.94 Hz mode)
67.70 mm/sec. (in 50 or 60 Hz mode)
Tape used:
Metal tape
Recording time:
126 minutes (using XL cassette)
92 minutes (using L cassette)
32 minutes (using M cassette)
FF/REW time:
Approx. 1 min. 30 sec.
(when XL cassette is used and
d100a speed is selected)
Search speed:
d100a
Digital slow:
j1k to i2k
(when playing back tapes recorded using the DVCPRO HD-
LP format)
j1k to i1.1k
(when playing back tapes recorded using any other format)
Editing accuracy:
d0 frames
(when time code is used, in 50 Hz, 59.94 Hz or 60 Hz mode)
Tape timer accuracy:
d1 frame (when continuous CTL signal is used)
Servo lock time:
Less than 0.3 sec. (from standby ON)
Loading time:
Approx. 4 sec. (using M/L cassette),
Approx. 6 sec. (using XL cassette)
Audio split editing:
Provided
[VIDEO]
Sampling frequencies:
Y: 74.176 MHz
P B /P R : 37.088 MHz (1080/59.94i, 720/59.94p)
Y 74.25 MHz
P B /P R : 37.125 MHz (1080/50i, 720/50p)
Quantizing:
8 bits
Video compression method:
DV-Based Compression (SMPTE370M, 317M)
Video compression rate:
1/6.7
Error correction:
Reed-Solomon product code
Video recording bit rate:
100 Mbps
Video Input Connectors
HD serial digital input:
BNC a 1
(Complies with the SMPTE 292M/296M/299M standards),
BNC
a 1 (active-through)
SD serial digital input:
BNC a 1
(Complies with the SMPTE 259M-C/272M-A, ITU-R
BT.656-4 standards),
BNC a 1 (active-through)
Reference input
Black burst/HD3 value SYNC auto switching
BNC
a 2 (Loop through), 75 h ON/OFF switching
Video Output Connectors
HD serial digital output:
BNC a 3
(Complies with the SMPTE 292M/296M/299M standards)
BNC
a 1 (monitor output with superimposed display)
SD serial digital output:
BNC a1
(Complies with the SMPTE 259M-C/272M-A, ITU-R BT.656-4
standards)
BNC
a 1 (monitor output with superimposed display)
Analog composite output:
BNC a 3
VIDEO1, VIDEO2, VIDEO3 (Super ON/OFF selectable)
To be output during SD playback or down-converting
Power supply: AC 100-240 V , 50/60 Hz
Power consumption: 125 W
indicates safety information.