Panasonic AJ-HD1800P - Manual (Page 101)

101
Setup menus
(continued)
<VIDEO> (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*2 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, 50 Hz (HD,
SD) mode or 50 Hz mode is selected in System Menu No. 25
(SYSTEM FREQ), this item is not displayed.
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
689* 1
COMP MODE
This is used to select the method to process the
image compression during recording.
0000 NORMAL
The images are recorded using the regular
compression processing.
0001 DARK
The images are recorded while minimizing the
compressed image distortion which arises in the
dark areas below about 10 IRE (70 mV).
<Notes>
z This setting is valid when recording in the 720p
mode.
z When [DARK] is selected, the indication (c)
blinks to the left of the second line of the super-
imposed indication.
690* 1
UMID REC
This selects whether or not to record the UMID
information on the tape.
0000 OFF
UMID information is not recorded on the tape.
The [EE] output is also blank.
0001 ON
The UMID set in menu No. 691 UMID GEN is
recorded. If no Basic UMID is available in the
input signals, a Basic UMID of the unit, which is
newly generated, is recorded.
<Note>
UMID information cannot be rewritten in this unit.
691* 1
UMID GEN
This selects a UMID that is recorded when
menu No. 690 UMID REC is turned “ON”.
0000 INT
Newly created basic UMID information of this
unit is always recorded.
0001 EXT
The UMID information of the input signals is
recorded. If no UMID is available in the input
signals, a Basic UMID of the unit, which is newly
generated, is recorded.
<Note>
The source pack (of the UMID information) of the
input signal will be recorded on the tape, regardless
of this menu’s setting.
692*
1
UMID
POS
This sets the line on which the UMID
information is to be superimposed.
0000 BLANK
0001 12L
: :
0006 17L
: :
0008 19L
<Notes>
z The line selected for the menu item No. 501
VITC POS-1 and No. 502 VITC POS-2 settings
cannot be selected for this item.
z Even if (RESET) is pressed while the
settings are changed, the settings does not
return to the factory settings.
z Metadata recorded on the tape will be output
giving UMID information first priority. When
metadata is output, set to a line other than the
original multiplexed line or select “BLANK.”
F4
No./Item Description of setting
693
GAMMA SEL This selects gamma correction.
0000 OFF
Gamma correction is not carried out.
0001 GAMMA1
This corrects video images shot with the cine
gamma FilmREC mode of the Varicam to images
of film quality (equivalent to Telecine 5 of HD
Gamma Corrector in AJ-GBX27G).
0002 GAMMA2
This corrects video images shot with the cine
gamma FilmREC mode of the Varicam to images
of film quality (equivalent to Telecine 6 of HD
Gamma Corrector in AJ-GBX27G).
0003 GAMMA3
This converts video images shot with the cine
gamma FilmREC mode of the Varicam into the
Cineon curve appropriate for film recording.
<Notes>
z Gamma correction is effective in the following
conditions.
Š When the VTR operation mode is VV (TAPE)
and 720p is displayed in the system format.
However, when the 23/24 mode is selected in
System Menu No. 25 (SYSTEM FREQ), or 59/
60 and 50i/25p are selected in System Menu
No. 25 (SYSTEM FREQ), as well as performing
the cross conversion from 720p to 1080i,
gamma correction is not performed for SD
output.
z If it is set to execute gamma correction, the GM
indicator in the time code display lights
constantly.
z When the power of the unit is turned OFF, the
settings in this item also return to [OFF].
z This item is not effective for 1394 output.
256
256
512
512
768
768 1023
1023
TELECINE5
TELECINE6
Cineon