Panasonic AJ-HD1800P - Manual (Page 56)

56
Function menus
(continued)
<CUE> (continued)
Search operations
Turn the ADJUST dial to highlight the desired registered
point.
When the PREROLL button is pressed, the preroll operation
is initiated. The tape will not be prerolled if no cue points
have been registered. Since the tape is not prerolled even if the PREROLL button
is pressed when the cue point registration mode is
established, be absolutely sure to check that the search
mode is established.
[The time selected by the <CUE SHIFT> menu [ (CU-
ROL) setting, which is different from the normal preroll time,
takes effect as the preroll time in this mode.]
The underlining (__) denotes the factory setting mode.
F5
Function button/
item
Switching
method
Setting
Corresponding setup menu
item
Description of setting
F1
PREV
Press
___ ___ For multi-cue page forward scrolling.
F2
NEXT
Press
___ ___ For multi-cue page forward scrolling.
F3
MODE
Toggle
SEARCH
ENTRY ___ For selecting the search or cue point
registration mode.
F4
CLR
Press
___ ___
For clearing the currently selected cue data.
ENTRY must be selected as the (MODE)
setting.
F5
AL CLR
F iPress
___ ___ When MANU is selected by +
(PAGE): All the cue data on the currently
displayed page is cleared.
When AUTO is selected by +
(PAGE): All the cue data on all the pages is
cleared.
F6
___
___
___ ___ ___
F1 (SHIFT)
___
___
___ ___ ___
F2 (SHIFT)
CARD
F iPress
___ ___ For calling the MULTI CUE file operation menu.
F3 (SHIFT)
PAGE
Toggle
MANU
AUTO No. 131
PAGE MODE Refer to the setup menu.
F4 (SHIFT)
ROTATE
Toggle
OFF
ON No. 132
ROTA MODE Refer to the setup menu.
F5 (SHIFT)
CU-ROL
Toggle i ADJ
0s --- 5s --- 15s No. 011
CU-ROLL TIME Refer to the setup menu.
F6(SHIFT)
___
___
___ ___ ___
F3
SHIFT F3
SHIFT F3