Panasonic AJ-HD1800P - Manual (Page 44)

44
Function menus
(continued)
<HOME> (continued)
Remaining tape/total tape display
The lengths of the remaining tape and total tape of the
inserted cassette are displayed in increments of minutes.
<Note>
Slight errors may occur. The remaining tape value blinks
when less than 3 minutes of the tape remain.
Cue time display
This displays the currently registered cue time. [For details
on the cue time operation, refer to [
Cue time registration,
preroll and cue-up] (page 119)]
Cue time operations can be performed on the HOME screen
only.
Time counter displays
If the time code data or user bits data could not be read out
properly, “T
¢R” or “U¢R” is displayed. If the CTL signal is
present, the time code data is supplemented by CTL.
Display Description
CTL CTL counter data
TCG Time code data of time code generator
UBG User bitsuser bits data of time code generator
tcg When the time code data of time code generator is
preset
ubg When the user bits data of time code generator is
preset
TCR/T ¢R Time code data of time code reader
UBR/U ¢R User bitsuser bits data of time code reader
REM 10/ 64 Example: (10 minutes remaining on a 64-minute tape)
Total tape
Remaining tape
TCR 00:00:00:00. Field mark
[1st field: “ ”/2nd field: “.”]
(This does not appear when the
i0.3k or
j0.3k speed is exceeded.)
Drop frame mark (59/60 Hz mode only)
[Non-drop frame mode: “:”/drop frame
mode: “.”]