Printronix P3000 Series - Manual (Page 108)

Programming 6–22
Character Set Select: 80–9F = Control Codes
ASCII Hex Decimal
P–Series SFCC 7 SFCC 37 SFCC 55
Serial ESC 7 1B 37 27 55
Purpose: Selects the character set wherein hex codes 80 to 9F are control codes. Also includes
hex codes 03 to 06 and 15 in Serial Matrix printer protocol. Cancels Character Set
Select activated by SFCC 6 or ESC u.
Comment: This feature is also selectable from the control panel (Application Compatibility
configuration menu structure).
Refer to the character set charts in Appendix B for the control codes in Serial Matrix
and P–Series.