Printronix P3000 Series - Manual (Page 136)

Programming 6–50
Line Spacing 7/72 Inch
ASCII Hex Decimal
P–Series SFCC 1 SFCC 31 SFCC 49
Serial ESC 1 1B 31 27 49
Purpose Specifies the line spacing at 7/72–inch increments.
Comment When the 7/72–inch line spacing control code is received, all lines are printed at the
7/72–inch line spacing until a new line spacing is selected or the power is reset. The
control code line spacing selection overrides the control panel line spacing setting,
and the message display reflects the line spacing as 10.3 lines per inch.
Use caution when combining this control code with other print attributes such as
Elongated (Double High), Superscript, or Subscript; overlapping lines may occur.
Printing at different horizontal and vertical densities does not cause overlapping.
Example The following example illustrates 7/72–inch line spacing.