Printronix P3000 Series - Manual (Page 129)

6–43 Programming
Horizontal Tab
ASCII Hex Decimal
P–Series N/A N/A N/A
Serial HT 09 09
Purpose Moves the logical printhead right to the next horizontal tab stop.
Comment Power–on default horizontal tabs are set at every eighth character in the Serial Ma-
trix printer protocol. If there are no horizontal tabs set or the logical printhead is lo-
cated at the last character column, the code is ignored and no movement occurs.
Horizontal tabs are stored as a relative position; therefore, character pitch changes
change horizontal tab positions. Refer to the Horizontal Tab Set control code to set
new tab positions.