Printronix P3000 Series - Manual (Page 112)

Programming 6–26
Character Set Select: International Languages (continued)
Comment The international character set can also be selected from the control panel. The con-
trol code setting overrides the control panel character set selection. Values other
than those selectable from Table 6–4 are ignored, except for SFCC RX discussed
below. In PSET mode, values outside the range on Table 6–4 produce an error mes-
sage (Command Line Error Messages are listed on page 6–3). Refer to the individ-
ual character set charts in Appendix B.
Selecting SFCC RX accesses the character substitution table defined by SFCC V for
the current base character set. Refer to SFCC V, Download a Language, on page
6–31.
Example The following example illustrates international character selection using the IBM
PC character set.